Mechanically Seamed System
Standing Seam
Mechanically seamed structural panel — the strongest concealed-fastener roof we roll.
- 24 & 22 ga steel
- Steel / Aluminum
- Mechanical seam
Specifications
| Panel width | 12" / 16" / 18" |
|---|---|
| Gauge / thickness | 24 ga & 22 ga steel, 0.032" aluminum |
| Substrate | Galvalume steel, aluminum |
| Seam type | 2" mechanically seamed, 90° or 180° |
| Minimum slope | 1/4:12 |
| Clip spacing | 12" – 60" per NOA wind uplift table |
| Finishes | Kynar 500 / PVDF, 30-year finish warranty |
Miami-Dade NOA
Approved for use in the High Velocity Hurricane Zone under current Miami-Dade County Notices of Acceptance. NOA number and uplift tables supplied with every submittal package.
Need the NOA for a permit package today? Call the shop and we'll send it.
Finishes
Standard Kynar 500 / PVDF colors shown. Custom color coil available with a mill minimum — swatch colors are approximate, order a chip before you specify.
- Charcoal Gray
- Slate Blue
- Regal White
- Sandstone
- Terra Cotta
- Hartford Green
- Matte Black
- Mill Finish Aluminum
Standing Seam cut sheet
Profile drawing, uplift tables and NOA reference — PDF.
Buy Standing Seam at dealer pricing.
Dealers get priority scheduling, submittal support and homeowner leads in their counties.
Apply to Become a Dealer