Snap-Together System
SnapLock Standing Seam
Snap-together standing seam — fast install, no seamer on the roof.
- 24 ga steel
- Steel / Aluminum
- Snap seam
Specifications
| Panel width | 12" / 16" |
|---|---|
| Gauge / thickness | 24 ga steel, 0.032" aluminum |
| Substrate | Galvalume steel, aluminum |
| Seam type | 1 3/4" snap-lock |
| Minimum slope | 3:12 |
| Clip spacing | 12" – 48" per NOA wind uplift table |
| Finishes | Kynar 500 / PVDF |
Miami-Dade NOA
Miami-Dade NOA approved assembly for HVHZ installation over approved deck and underlayment.
Need the NOA for a permit package today? Call the shop and we'll send it.
Finishes
Standard Kynar 500 / PVDF colors shown. Custom color coil available with a mill minimum — swatch colors are approximate, order a chip before you specify.
- Charcoal Gray
- Slate Blue
- Regal White
- Sandstone
- Terra Cotta
- Hartford Green
- Matte Black
- Mill Finish Aluminum
SnapLock Standing Seam cut sheet
Profile drawing, uplift tables and NOA reference — PDF.
Buy SnapLock Standing Seam at dealer pricing.
Dealers get priority scheduling, submittal support and homeowner leads in their counties.
Apply to Become a Dealer